Solar installers do not need to rely on shared lead marketplaces to grow. The homeowners most likely to go solar leave visible signals, such as a new roof, a newly built house or a large addition, and you can reach them directly, before they fill out a quote form that goes to several companies at once.
This playbook covers the signals worth watching, how to time your outreach, and the referral and mail tactics that turn those signals into consultations.
The problem with buying leads
Lead marketplaces and aggregators collect homeowner inquiries and sell them to installers. Depending on the service, a lead may be sold to one installer or shared among several. Before you buy, read the terms of the specific service carefully: how many companies receive each lead, what counts as a valid lead, and whether returns or credits are offered.
Whatever the terms, purchased leads share two traits:
- You arrive after the homeowner has started shopping. By the time they submit a form, they are often comparing several quotes.
- You are paying for contact, not trust. The homeowner does not know your company yet and is often fielding calls from others.
The alternative is to find homeowners earlier, when solar is a sensible next step but they have not yet asked anyone, and to reach them as a known local company rather than one name on a list.
Signal 1: a new roof
A new roof is the strongest solar signal you can get from public data. Solar panels are meant to stay on a roof for many years, and removing and reinstalling them to replace an aging roof later adds cost. That is why installers ask about roof age, and why a homeowner who has just re-roofed has removed one of the most common reasons to wait.
Roofing permits are plentiful in many markets. In the last 30 days, as of Nov 18, 2026:
- Miami-Dade County, FL: 806 roofing permits, up 14% on the month before.
- Dallas, TX: 263 roofing permits, up 11%.
- Edmonton, AB: 8 roofing permits, flat.
How to use it: wait a few weeks after the roofing permit so the homeowner has finished one project before you suggest the next. Lead with the roof: "Your new roof is ready for solar." Our article on what homeowners buy after a new roof explains the wider sequence.
Signal 2: a new home
New houses are a good fit for solar in several ways: the roof is new, the owners are setting up utilities and budgets from scratch, and they have not yet settled into the habit of their old electricity bill. Some builders offer solar as an option or include it as standard, so check what was permitted before you reach out.
In the last 30 days there were 414 new-home permits in Dallas and 154 in Miami-Dade County. New homes take months to build, so the right time to reach out is near completion or soon after move-in. See marketing to new homeowners for timing and message ideas.
Signal 3: additions, electrical upgrades and EVs
A large addition adds floor area, and often new electrical load from extra heating, cooling or appliances. Electrical panel upgrades, EV charger installs and battery or generator permits are also useful signals where your local data includes them: they show a homeowner thinking about power, capacity and resilience.
These are softer signals than a new roof. Use a softer message: "Planning around a bigger home or an EV? Here is what solar could add."
Signal 4: solar permits themselves
Existing solar permits tell you two things. First, which neighborhoods are adopting solar, which helps you focus door-to-door, events and mail where neighbors are already talking about it. Second, where you can offer battery storage, panel cleaning, monitoring or system expansion later. Solar permit volume varies a lot by market: Edmonton recorded 113 solar permits in the last 30 days, compared with 101 in Dallas, both as of Nov 18, 2026.
Turning signals into conversations
Direct mail
Mail suits solar well because the decision is considered, not impulsive. A homeowner can keep a card on the counter, show it to a partner and look you up later. To make it work:
- Reference the trigger. "Congratulations on the new roof" or "Welcome to your new home" tells the homeowner why they are hearing from you.
- Make one clear offer. A free roof and shade assessment, or a no-obligation design with estimated production for their address.
- Avoid hard numbers you cannot back up. Savings, payback and incentives depend on the home, the utility and current rules, which change. Save specific figures for the consultation, with sources.
- Show you are local. A local phone number, a nearby installation photo and your license number build trust.
Our guide to direct mail for contractors covers format, lists and timing.
Referrals from roofers and builders
Roofers see homeowners at exactly the right moment, and many do not install solar. Offer roofers something useful in return: you send them homeowners whose roofs are too old for solar, and they mention you to customers who have just re-roofed. The same works with custom home builders who do not offer solar themselves.
Customer referrals
Your existing customers are the most credible voice you have. A clear referral offer (for example, a credit for both the customer and the neighbor who signs) and a reminder at system turn-on and after the first good production month keep it top of mind. Neighbors who see panels go up nearby are already curious.
A one-week plan
- Pick the ZIPs or neighborhoods you serve best.
- Look up roofing and new-home permits from the last few months with the permit lookup or the Miami-Dade roofing permits page.
- Write two short messages: one for new roofs, one for new homes, each with a single offer.
- Call three local roofers who do not install solar and propose a referral exchange.
- Set up a simple referral credit for existing customers and tell them about it.
If you would rather not pull permit data yourself, Permitnote mails a card from your company to each household that pulls a roofing or new-home permit in your area the same week. Whichever way you do it, the principle is the same: reach homeowners when solar first makes sense, not after they have filled in a form for five companies. For more on comparing these approaches, read permit marketing vs lead marketplaces.
FAQ
How do solar companies get leads without buying them?
By reaching homeowners at moments when solar makes sense, such as a new roof or a new home, through direct mail, roofer and builder referrals and customer referrals. Public building permit data shows where those moments are happening.
Is a new roof a good time to install solar?
Generally yes. Panels are meant to stay up for many years, so installing them on a new roof avoids the cost of removing and reinstalling them for a later re-roof. Ask installers how they mount panels on your roof type.
Are shared solar leads worth it?
It depends on the price, how many installers receive each lead, and your close rate. Track cost per signed contract, not cost per lead, and compare it with channels where you reach the homeowner first.