San Francisco issued 2,721 residential building permits in the last 30 days, flat on the 30 days before. Almost none of that is new housing on empty lots. San Francisco is a remodeling city: kitchens and baths in Victorians and Edwardians, re-roofs on Sunset District row houses, and window replacements across the Mission and the Avenues.
This report uses the City's official permit data from DataSF, with figures through Nov 18, 2026. Unlike many cities, San Francisco publishes a job value on nearly every permit, so the medians below are based on the full set of permits.
San Francisco at a glance
| Trade | Last 30 days | vs prior 30 days | Median job value (90 days) | Busiest ZIP (30 days) |
|---|---|---|---|---|
| Remodel | 719 | down 3% | $21,000 | 94116 |
| Roofing | 442 | down 5% | $16,000 | 94112 |
| Windows & doors | 313 | up 8% | $12,937 | 94110 |
| HVAC | 231 | up 9% | $12,000 | 94114 |
| Deck & patio | 94 | down 10% | $20,000 | 94122 |
| Home additions | 54 | up 8% | $53,383 | 94110 |
A permit can carry more than one tag, so rows do not add up to the total. For the permit list by street, see the San Francisco market page.
How the San Francisco data works
The City publishes two permit sources: the newer PermitSF system and the Department of Building Inspection's legacy building permits. Both are combined here. Because PermitSF records do not say whether a building is a house, residential status comes from the Assessor's property class for the parcel: single-family homes, flats and small multi-unit buildings count; large apartment buildings, offices and stores do not.
Two limits to keep in mind:
- Contractor names are available on legacy DBI permits but not on PermitSF permits, so you cannot always see who is doing the work.
- Plumbing and mechanical permits are not counted as HVAC unless the description says so, because the city's combined "plumbing and mechanical" permit covers water heaters too.
Remodels: the core of the market
As of Nov 18, 2026, remodels are San Francisco's largest residential category in our data, with a median job value of $21,000. That median sits well below what a full kitchen gut costs in the city, because the category also includes bathroom refreshes, dry rot repair and small interior alterations.
For contractors who follow a remodel, the order of work is fairly predictable:
- Before or during: electricians and plumbers who are not on the GC's team, window and door replacement, and structural or foundation specialists on older houses.
- Near completion: painters, flooring, closet systems, window coverings and post-construction cleaning.
- After: handyman services, smart-home and security, and landscaping for the back yard that the remodel opened up.
See the San Francisco remodel permits page.
Re-roofs and windows: exterior envelope work
San Francisco issued 442 reroofing permits in the last 30 days, with the most in 94112. The median reroofing value is $16,000. Many San Francisco houses have flat or low-slope roofs, so this mixes torch-down and membrane work with pitched shingle jobs.
Windows and doors ran at 313 permits, with a median of $12,937. A household replacing windows is investing in comfort and noise control, and is often open to insulation, weatherstripping, siding repair and painting. Window permits on a facade in a historic district may also involve planning review, which slows the job and widens the window for follow-up trades.
Our guide on what homeowners buy after a new roof covers the exterior chain in more detail.
HVAC and heat pumps
HVAC permits in San Francisco came in at 231 over the last 30 days, with a median of $12,000. Many older San Francisco homes were built with wall heaters or gravity furnaces and no air conditioning, so a new HVAC permit often means a first heat pump or ducted system. That household will want a maintenance plan, and may be open to electrical upgrades and insulation.
Decks and additions
Deck and patio permits ran at 94 (median $20,000), and additions at 54 (median $53,383). On small city lots, a deck permit is often a rear deck or stair rebuild rather than a new backyard platform, so read the description before you pitch. Additions are typically rear or vertical expansions that take months, which gives follow-up trades time to get in early.
What to do this week
- Choose one trade and two ZIPs. In a dense city, a few ZIPs give you plenty of permits and tight routes.
- Look up current permits by ZIP with the free permit lookup.
- Make the offer specific to the house. "Window coverings for your new windows" lands better than a generic brochure.
- Preview your card with the postcard designer.
- Mail the week of the permit for trades that compete with the GC; two to six weeks later for finishing trades.
Our building permit leads playbook covers timing by trade. Permitnote can mail a card from your company to each matching San Francisco permit the week it is issued.
FAQ
How many building permits does San Francisco issue a month?
In the last 30 days the City issued 2,721 residential permits, flat on the prior 30 days. That excludes large apartment buildings and commercial property.
How much does a remodel cost in San Francisco?
The median job value on San Francisco remodel permits over the last 90 days is $21,000. That is the declared value on the permit, which covers a wide range of jobs, so real quotes vary a lot.
Where can I search San Francisco building permits?
The Department of Building Inspection has an online permit search by address, and DataSF publishes permit datasets. For a quick view by ZIP, use the permits near me lookup.